Drain and Sewer Nozzles For Cleaning and Relining

Stage 2: The Second Nozzle Assembly You Need

After you have penetrated the blockage and can get a line through it , you will want to clear it completely or roots and debris. Our penetrating nozzle assemblies may be able to do that for you. However, they only apply 30 -40% of your jetters power to the job.  Our cutter nozzles from the DC range use 100% of the energy to cleaning and cutting out debris. 

The DC Cutters clean back down the line with 100% power applied to the job

This is where our DC cutters come in. They cut and clean backwards down the line. Really fast.

They are the most effective and powerful back cutting turbo nozzle assemblies on the market for operating in 4"-6"+ pipes. This is because the water jet is a laminar flow jet. The power of your pump is not taken away with water turbulence. This means they are capable of cutting through tree roots, ice, grease, toilet wipes and much more.

You can use them to penetrate and cut forward in soft or hard materials. You can then flush out all debris from the line without changing nozzles. They work down-stream through a minimum 50 mm access point. Our cutting nozzles have attachments allowing you to adjust the angle of attack in the line.

The cutters can enter a line and go around many types of bends as shown in the diagram here.

You can use the assemblies in all pressures up to 5000 psi and in hot water up to 180 F or 80 C.

Which Cutting Nozzle Assembly Is Right For Me?

You will need a jetter that produces a minimum water flow of 5.5 gals per min (21 litres per min) 

DC38 Cutter Assembly

Best for use in <4" lines

Direct Hit DC38 Sewer Nozzle Assembly

Direct Hit DC38 Sewer Nozzle Assembly

Use the DC38 when you want to clean 3" - 4" lines (75 mm - 100 mm). The nozzle assembly can enter lines with a minimum if a 2" (50 mm) access point.

DC43 Cutter Assembly

Best for use in 6" lines

Direct Hit DC38 Sewer Nozzle Assembly

Use the DC43 when you want to clean 4" - 6" lines (100 mm - 150 mm). The nozzle assembly can enter lines with a minimum if a 2" (50 mm) access point.

100% MONEY BACK GUARANTEE


We believe strongly in the quality of Direct Hit Nozzle Assemblies to not only substantially speed up your drain and sewer clearing, but also to make back 20x your investment.

We’ve poured our heart and soul into building a product that will enable you to do the job better than any other solution out there. And we want you to benefit from the speed, power and control of a Direct Hit nozzle assembly without a worry. So we confidently back it with a 30-Day, Money-Back Guarantee. 

If you’re not satisfied in any way, just send the nozzle back to us within 30 days of purchase, and we'll refund your money. There’s only ONE condition: Please tell us the main reason you weren’t happy with the product, so we have a chance to make it even better if we can.