DC43 Extreme Flusher Cutter

From $2,316.20 ex. GST

Description

General Information

Travels through 100mm (4″) bends and drops into a 100mm (4″) shaft when travelling downstream.

Its specialty is to cut through extreme blockages either in a forward direction (straight line), around bends or dropping into a shaft, with its back-turbo nozzle and used in 150mm lines (6″) caused by big tree roots, ice, hard fat etc. without twisting and turning the hose.

Can be adjusted with stainless steel rings to increase its power to work in 100mm, 150mm, 225mm and 300mm lines (4″, 6″, 9″ & 12″).

Stainless steel rings for the DC43 can be purchased here.

Hose Requirements

The minimum hose size to be used is 1/4″ to keep the pressure at the end of the hose high.

Can be used with 3/16″ hose, but you will lose pressure on the nozzle.

Direct Hit recommends using a 3/8″ or 5/16″ hose on your main reel and a 1/4″ hose on your mini reel.

We find that plumbers are using 1/4″ x 1/4″, or 1/4″ x 3/16″ hoses and the pressure at the nozzle decreases dramatically.

This will prevent your nozzles from working to their full capacity when attempting to cut tree roots quickly.

For sizes other than 4.5 or 6.0, please contact us directly here.

Select your Cutter Size and Hose Style

Additional information

Job Type

Blocked Drains

Applications

Cutters for Tree Roots, Grease, Debris, Flushers for Debris

Pipe Size

100mm (4"), 150mm (6"), 225mm (9"), 300mm (12"), 400mm (16")

Jetter PSI or BAR

2000-3000 Psi, 3000-4000 Psi, 4000-5000 Psi

Jetter Litres or GPM

15 L/min, 21 L/min, 25 L/min, 31 L/min, 35 L/min

Jet Size

4.5, 6.0

Hose Configuration

1 Hose, 2 Hoses

Hose Tail Thread Type

BSPP, NPT

Hose Tail SS Connectors

1/4 BSPP SS Female Swivel, 1/4 NPT SS Female Swivel, 3/8 BSPP SS Female Swivel, 3/8 NPT SS Female Swivel

Machine Flow

Under 45 L/min

Configure

Related Components