Penetrators used in 100mm to 450mm (4"-18") lines

The Extreme (Short) Penetrator!

“This is a must for your tool box”

Your GO TO nozzle in any situation (extreme tree roots, grease, wipes etc) with a front turbo nozzle.

If you had to choose one weapon to go to battle in 100 - 450mm (4-18") lines it will be this.

Travels through 100mm (4") bends and drops into a 100mm (4") shaft when travelling downstream.

Minimum hose size to be used with is 1/4".

Add a different size ring to increase its power.

The All-Purpose (Short) Penetrator!

With its front turbo nozzle, this penetrator's specialty is to penetrate, unblock and cut forward through extreme tree roots, hard grease around bends or dropping into a shaft.

The nozzle can be used in 100 - 450mm (4-18") lines.

Travels through 100mm (4") bends and drops into a 100 mm (4") shaft when travelling downstream

Minimum hose size to be used with is 1/4".

Add a different size ring to increase its power.

Penetrators used in 100mm to 450mm (4"-18") lines

The Extreme (Long) Penetrator!

“This is a must for your tool box”

Your GO TO nozzle in any situation (extreme tree roots, grease, wipes etc) with a front turbo nozzle”

“If you had to choose one weapon to go to battle in 150 - 450mm (6-18") lines it will be this”

Travels through 100mm (4") bends and drops into a 150mm (6") shaft when travelling downstream.

Minimum hose size to be used with is 3/8".

Add a different size ring to increase its power.

A Specialty (Long) Penetrator!

Ideal weight to work in mains with front rings to cut, clean and flush down stream.

“Penetrate, unblock, cut tree roots, hard grease and flush out lines forwardly from 150 - 450mm (6-18") lines.

Travels through 100mm (4") bends and drops into a 150mm (6")shaft when travelling downstream

Minimum hose size to be used with is 3/8".

Add a different size ring to increase its power.

Cutters

Cutter used in 100mm to 300mm (4 -12") lines


The extreme small cutter!

Designed for 100mm (4') lines, has a back turbo nozzle and can work with our ring kits in bigger vline

This is a must for your tool box, it enables you to cut big tree roots, grease, etc and then flush out your 100 mm lines (4") and great for relining.

“If you had a second choice on a weapon to go to battle, it will be this”

Minimum hose size 04 (1/4").

Add a different size ring to increase its power.

Cutter used in 150mm to 300mm (6-12") lines

The extreme big cutter!

“ BIG Steve as they call him down under”

Designed for 150mm (6') lines, has a back turbo nozzle and can work with our ring kits in bigger lines.

This is a must for your tool box, enables you to cut big the tree roots, grease, etc or flush and clean out lines before relining mains with a baby jetter.

“If you had a second choice on a weapon to go to battle, it will be this”

Minimum hose size 04 (1/4").

Add a different size ring to increase its power.

In-Line Thrusters For Our Penetrators and Cutters

Adaptor For All Jetters

Used between the nozzle assembly and the main jetter hose to be able to:

  1. Use a nozzle assembly that is jetted for a 1/4" hose at 30 l/min (8gpm), to be able to work in a 100mm (4") lines and then attach the same nozzle assembly with a Thruster to work in a 300mm line with 60 l/min (18gpm).
  2. Use a nozzle assembly on your small jetter that runs 30 l/min (8 gpm), then use the same nozzle assembly with a Thruster on your other big jetter that runs 68 l/min (18 gpm).
  3. Use a nozzle assembly on one of your twin jetter combo, then attach the same nozzle assembly with a Thruster to turn on the second pump and work in larger lines.