Inline Tier 3 Thruster (C38rsT)

Used between the nozzle assembly and the main jetter hose to be able to use a nozzle assembly:

  1. That is jetted for a 1/4″ hose at 30 l/min (8 gpm), to be able to work in a100 mm (4″) lines and then attach the same nozzle assembly with a Thruster to work in a 300-mm line with 60 l/min (18 gpm).
  2. On your small jetter that runs 30 l/min (8 gpm), then use the same nozzle assembly with a Thruster on your other big jetter that runs 68 l/min (18 gpm).
  3. On one of your twin jetter combo, then attach the same nozzle assembly with a Thruster to turn on the second pump and work in larger lines.
Category:

Used between the nozzle assembly and the main jetter hose so you can use a nozzle assembly:

  1. That is jetted for a 1/4″ hose at 30 l/min (8 gpm), to be able to work in a 100mm (4″) lines and then attach the same nozzle assembly with a Thruster to work in a 300mm line with 60 l/min (18 gpm).
  2. On your small jetter that runs 30 l/min (8 gpm), then use the same nozzle assembly with a Thruster on your other big jetter that runs 68 l/min (18 gpm).
  3. On one of your twin jetter combo, then attach the same nozzle assembly with a Thruster to turn on the second pump and work in larger lines.

 

Product Description

The C38rsT assembly is made from stainless steel for it not to rust. It is 38mm O.D. You have a choice of 3, 4, or 6 ceramic jets at 15 degrees. It’s a Tier 3 assembly with 1/4 forward female BSPP thread and a back 3/8 a female BSPP thread.

We can supply any combination connectors to suit your hose BSPP or NPT.

Rated at 6000 psi.